Basket items =

Basket total =

Including VAT =

Product Related Downloads and Links

Product Information

VentureClad five-ply aluminized cladding

Venture Clad is a five-layer aluminium and polyester laminate that has become the industry standard covering for all sorts of types of insulation.

Developed for the new millennium, this robust, weatherproof product became available in the year 2000. Initially designed as cladding for insulation on air conditioning ducting and ventilation ducting, VentureClad soon became synonymous with the cladding product to enhance building insulation ... replacing mastic, scrim, metal cladding, p.i.b. rubber, and many more.

However, the highest quality tapes and cladding are ineffectual without the most effective and appropriate adhesives ...

adhesives that make a permanent bond regardless of temperature, be it a frozen hard 'minus-fifty' degrees or mind-melting 149 degrees, Venture adhesives adhere!

Venture Clad Five-Ply laminated foil puncture resistant facing for
exterior and interior applications

Applicable to foam glass, mineral fiber insulation, nitrile rubber foam, and semi-rigid and rigid foam insulation. Specify for replacement of fab and mastics, butyl duct wrap, and other interior and exterior jacketing materials.

Venture Clad 1577cw

Venture Tape VentureClad™ 1577CW is a patented, zero permeability, absolute vapor barrier for insulation cladding and jacketing applications. A 5-ply, self adhesive material installs quickly and easily with no special tools required, resulting in significant time, labor, and cost savings.

VentureClad™ 1577CW® exceeds most building code requirements and can be used for new construction as well as repair on existing structures.

Available in natural aluminum, white, black, and stucco embossed texture, Venture-
Clad™ 1577CW® is the highest performing, highest value product on the market today.

Features & Benefits

High performance jacketing product performs well over a wide temperature range; -30°F to +300°F
(-34°C to +149°C) service temperature

Venture CW® cold weather acrylic adhesive applies easily at temperatures as cold as -10°F (-23°C)

Zero permeability, absolute vapor barrier

High puncture and tear resistance

Contains tested and approved mold inhibiting agents

Self adhesive material installs easily with no off-site fabrication required

Exceeds standard building design requirements (UL 723 10/20 Flame Spread/Smoke Rating)

Meets requirements of FSIS Directive 5000.1, 9 CFR, Part 416 for USDA and FDA facilities and Department of Health and Human Services Construction Guide for Food Facilities

Product Configurations

Available in Natural Aluminum (1577CW®), White (1577CW® - W), Black (1577CW® - B), Natural Aluminum Stucco
Embossed (1577CW® - E) and White Stucco Embossed (1577CW® - WE)
Standard widths: 23” (584mm), 30” (760mm), 35½” (900mm), and 46” (1170mm)
Standard length: 50 yards (45m)
Custom widths and lengths available, contact Venture Tape for specifications and requirements

Venture Clad Installation Instructions

Surface Preparation

Ensure that all surfaces are dry and clean, free from dust, oil and grease/silicone. All
insulation should be taped securely, giving an even surface for the VentureClad application.
All adhesives work best when firmly 'wetted out' to the substrate surfaces.

When applying, partly peel back and crease the liner until enough adhesive is available to
attach the VentureClad in the correct position. Then, with a spreader, progressively
remove the liner while smoothing, until the entire sheet has been applied.
When applying VentureClad sheet onto a continuous surface until it meets itself, a 3
inch (75 mm) overlap is recommended to give a strong, weatherproof seal. Plan the
wrap so that the edge of the sealing lap faces down.

Application to Rectangular Ductwork

On duct-work over 32 inches (80 cm) wide, it is recommended that the top be crowned
(pitched), to allow water runoff, preventing pooling.

For fast, easy application, VentureClad should be applied to each of the sides separately, starting with the bottom surface, then the sides, and finally the top. Pre-cut the VentureClad to the required size, plus an additional overlap of 3 inches (75 mm) for each adjoining surface.
When applying to rectangular ductwork, apply to the bottom surface first, bringing the 3 inch (75 mm) overlap up, onto the sides. Next apply VentureClad to the vertical surface, bringing the 3 inch (75 mm) overlap over onto the top surface. Finally, apply
VentureClad to the top of the duct, spreading toward the edges before trimming at
the corners.

Application to Plpe/Circular Section Ductwork

On straight pipe, cut VentureClad to the desired length (pipe circumference), plus an
additional overlap of 3 inches (75 mm).
Apply the next piece allowing a 3 inch (75 mm) overlap onto the previous section.
On bends and elbow configurations, cover the pipe insulation with VentureClad.
Cut out the required shapes to cover the segments of the bends and elboW5 and apply.
Use VentureClad 1578CW tape of appropriate width to seal the resultant seams. (See Note).

Application to Ductwork Reducer

Starting from the bottom, work upwards allowing an overlap of 3 inches (75 mm)
onto adjacent surfaces.

First apply VentureClad to surface No1, and overlap onto each adjoining surface.

Apply VentureClad to surface No.2, and overlap onto surfaces 00. 3, 4, and 5, sealing
onto the overlap and trimming flush at surface No. 1, lo achieve a neat, secure finish.

Apply VentureClad to Surface No.3 in the same manner as to surface No.2, but seal
onto the overlap and trim at surface No.2.
Finally, apply VentureClad 10 surfaces No. 4 and 5 as with other rectangular ductwork.

On "tee" sections, make appropriately configured templates of VentureClad,
leaving a 1 inch (25 mm) overlap.
On reduced pipe, apply VentureClad first to surface No. 1, overlapping onto surface
No.2. Cut shape No. 2, allowing for 3 inch (75 mm) overlap, and apply 10 surface No.2,
overlapping onto section No. 1

Apply VentureClad to surface No.3 overlapping and sealing onto section No.2.
Finally, apply to surface No. 4, overlapping and sealing onto section No. 1.

1578CW® VentureClad® Closure System

A three ply laminate, made with 2 layer of aluminum foil (outer layers) and 1 layer of polyester film (core), coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick at normal temperatures with superior low temperature performance below freezing.

The construction of this specialty laminate makes it highly puncture and tear resistant as well as flame retardant.

Repair of VentureClad

Should damage occur, simply ensure that the surface is dean, and apply a new section of VentureClad 1577CW over the damaged area, to a minimum of 3 inches (75 mm) past the damage site.

Note:

Seams on bends, elbows, "tee," and similar junctures must be sealed with VentureClad 1578CW Tape. VentureClad 1578CW Tape is a three-ply laminate (foil/film/foil/adhesive) for greater conformity.

The use of VentureClad 1578CW Tape is mandatory, in order to maintain conditions the VentureClad Ten-Year Limited Warranty

 

Downloads - select from drop-down menu below

Select from drop-down menu VentuteTape 1507CW VentuteTape 1577CW VentuteTape 1577CW - Fitting VentuteTape 1585CW

Manufacturer's Contact Details

Venture Tape Europe Corporation, Units 5-6 Faraday Close, Drayton Fields, Daventry, NN11 8RD, England

Tel: +44 (0) 1327 876555 - Fax: +44 (0) 1327 876444
Email: Click here - Internet: www.venturetape.co

This page was last updated: Wednesday, February 1, 2012

Please telephone for prices of VentureTape or VentureClad products not listed here - 08454 3511153.

Price increases - Please add 7% to the prices below

Please order by Telephone - Minimum order quantities apply

 

Insulation Online Limited

27 Massetts Road, Horley, Surrey, RH6 7DQ

Email: enquiries@insulation-online.com

insulation-online.com - £500.00+ orders/large vehicle access
just-heating.com - electric central heating, boilers, radiators
just-rooflights.com - rigid tube light pipes / sky light tunnels
just-insulation.com - DIY specialists and small builders

Product Categories Return to Home Page Insulation Boards Overview Insulation Boards PIR Insulation Boards Phenolic Insulation PUR Polystyrene Insulation Slabs / Batts Insulation Rolls Reflective Insulation Foils Plasterboards + Wallboards Breather Membranes

---

Multi-foil Insulation Comparison

---

Special Offers Rafter level package - retro-fit Rafter level package - new-build Wall insulation - retro-fit

Product List Return to Home Page Actis Triso Super 10 Actis Triso Sols Armaflex Tubes + Sheets Celotex T-Break TB4000 Celotex Tuff-R GA4000 Celotex Xtra-R XR4000 Celotex Cavity CW4000 Celotex EngeryLok EL3000 Celotex Fast-R FF4000 Celotex Wallboard PL4000 Celotex TA4000 Celotex Tempchek Deck TD4000 Celotex Fire Resist FR5000 Ecousti Acoustic Insulation Gen-X Multi-Foil - Euroform Gyproc Plasterboards Gyproc ThermaLine Boards Isover APR Isover Spacesaver Jabfloor 70 Kingspan Phenolic Boards - All Kingspan PUR Boards - All Kingspan Thermapitch TP10 Kingspan Kooltherm K3 Kingspan Kooltherm K5 EWB Kingspan Kooltherm K7 Kingspan Kooltherm K8 Kingspan Kooltherm K10 Kingspan Kooltherm K12 Kingspan Kooltherm K15 Kingspan Kooltherm K17 Kingspan Kooltherm K18 Kingspan Thermaroof TR21 Kingspan Thermaroof TR22 Kingspan Thermaroof TF73 Knauf Acoustic Partition Roll Knauf Loft Roll 44 Knauf Rafter Roll 32 Knauf Plasterboards Knauf Thermal Laminates Universal Flexi Slabs Universal RS Slabs Rockwool Flexi Slabs Rockwool RW Slabs Rockwool Cavity Slabs Rockwool Fire Barrier System Speedline Dry-wall Systems Tyvek Supro Breather Membrane Tyvek Supro Plus Membrane Tyvek Housewrap Membrane TLX Gold - WebDynamics TLX Silver - WebDynamics TLX RafterFit - WebDynamics Ufoil Bubble-Foil - Euroform Venture Clad YBS SuperQuilt Multi-foil YBS Air-Tec Single + Bubble Foil YBS Foil-Tec Single + Double Foil YBS Breather Foil FR YBS Non-Itch Insulation Rolls YBS Non-Itch Slab Insulation Special Offers

Product Manufacturers Return to Home Page Actis Insulation Ltd Armacell Limited - Armacel British Gypsum Ltd - Gyproc Celotex Limited CPD Distribution - Speedline Du Pont Tyvek Ltd - Tyvek Euroform Limited Kingspan Insulation (UK) Limited Knauf Insulation Ltd Mayplas Limited - E-Cousti Saint Gobain - (Isover) Vencel Resil (Jabfloor) VentureTape Limited Web Dynamics Ltd YBS Insulation Limited Special Offers

Search

All information is extracted from that provided by the manufacturer, and links to their technical literature are provided above. Please contact the manufacturer for details beyond the scope of this web site.

Select the products that you require, by ticking the appropriate boxes, then click the 'Add to Cart' button to add quantities.