Basket items =

Basket total =

Including VAT =

Product Related Downloads and Links

Product Information

Isover APR 1200 Acoustic Partition Roll

Isover APR 1200 is a non-combustible glass mineral wool roll that provides a strong, resilient and flexible insulating mat, which is easy to cut, handle and install and will not slump under its own weight.Glass mineral wool roll designed to provide high levels of sound insulation in walls and floors.
APR 1200 is the only acoustic insulation quilt fully tested and approved for use with British Gypsum dry wall systems covered by the SpecSure® Lifetime Performance Warranty

Description

APR 1200 is a non-combustible glass mineral wool roll for sound insulation in partitions, walls and floors.
The product provides a strong, resilient and flexible insulating mat, which is easy to cut, handle and install and will not slump under its own weight when suspended vertically.

Benefits

•Meets Part E Building Regulations (England and Wales) for internal walls and floors and party wall and floors
•Meets Section 5 (Scotland) acoustic requirements
• Guaranteed lifetime performance as part of the British Gypsum SpecSure™ system warranty
• Good thermal performance
• Easy to install
• Excellent fire performance
• Long product life - will not age
• Fully compatible with all standard building materials and components

Standards

Isover Loft Insulation products are manufactured under
BSI Quality Management Standard BS EN ISO 9001:2000 to meet Part E (England &Wales) and Section 5 (Scotland) acoustic requirements.

Acoustic Performance

Internal Partitions

Part E Building Regulations July 2003 calls forminimum40dB airborne sound insulation in imperforate internal partition walls.
The following constructions incorporating APR 1200 will comply with this requirement.
Timber Stud Partitions
A partition wall constructed from1 layer of 12.5mm
Gyproc WallBoard each side of timber studs at 600mm
centres, with APR 1200 within the cavity.
A partition wall constructed from1 layer of 12.5mm
Gyproc WallBoard TEN each side of timber studs at
600mmcentres, with APR 1200 within the cavity.
Metal Stud Partitions
1 layer of 12.5mmGyprocWallBoard each side of
Gyp Framemetal studs at 600mmcentres with APR 1200
within the cavity.

Party Walls

Part E Building Regulations July 2003 calls for a minimum 45dB airborne sound insulation in party walls (plus additional Ctr correction factor for low frequency noise).
The following construction incorporating APR 1200 will comply with this requirement as a Robust Detail.
Twin Timber Frames with or without cavity sheathing board
Two layers of plasterboard nominally 22Kg/m2 (typically 19mmGyproc Plank plus 12.5mmGyprocWallBoard) with joints staggered, each side of twin timber frames with a minimum of 65mmAPR 1200 in each frame.
Renovation
The solution detailed below is a practical upgrading solution for existing walls that provides a high level of acoustic improvement in conversion work.
103mmbrick wall with 13mmplaster on each side lined on one side with 1 layer of 12.5mmGyproc SoundBloc board fixed to Gyproc GypLinermetal frame system(35mmgap from wall) and 25mmAPR 1200 within the cavity.

Internal Floors in New Dwellings

Internal floors within the same dwelling need to achieve 40dB airborne sound insulation. Solutions can be either supported by laboratory test reports or contained within Approved Document E (to comply with Part E Building Regulations, July 2003 England and Wales).
The following floor constructions meet this requirement.
Engineered I-joist Floor
Timber floor consisting of engineered I-joists nominally 240mmdeep and at 600mm centres, with a screw-fixed walking surface of 22mm T & G chipboard, and with a ceiling finish of 15mmGyprocWallBoard screw-fixed directly to the joists. A 65mmthickness of APR 1200 laid on top of the plasterboard ceiling.
Timber joist Floor
Timber floor consisting of 200mmx 50mmtimber joists, with an 18mmT & G chipboard walking surface, and
with 12.5mmGyprocWallBoard TEN ceiling. APR 1200 to aminimum100mmthickness in the floor void.

Fire Performance

Made from inherently non-combustible materials, APR 1200 is completely fire safe, achieving a Euroclass A1
fire rating when classified in accordance with BS EN 13501-1.
The following constructions show the fire resistance for imperforated partitions using Gyproc metal partitioning
with APR 1200 in the cavity.
Internal Partitions - 60minutes
Two layers of Gyproc SoundBloc board (2x12.5mm) each side of 92mmGyprocmetal studs at 600mm centres plus 90mm APR 1200 in the cavity.
Internal Partitions - 90minutes
Two layers of Gyproc WallBoard (2x15mm) each side of 146mmGyproc studs at 600mmcentres plus 50mm
APR 1200 in the cavity.
Internal Partitions - 120minutes
Two layers of Gyproc FireLine board (2x12.5mm) each side of 146mmGyproc studs at 600mmcentres plus 50mm APR 1200 in the cavity.

Durability

Made from rot-proof non-hygroscopic materials.
Will not accelerate corrosion with steel, copper or aluminium.
Will not sustain vermin, nor breed or promote fungi or bacteria..

Building Regulations Compliance

APR 1200 Acoustic Partition Roll Glass mineral wool roll designed to provide high levels of sound insulation in walls and floors to meet Part E (England &Wales) and Section 5 (Scotland) acoustic requirements

Thermal Performance

APR 1200 ismanufactured in roll form, compression packed in individual packs using a strong polythene packaging film. The packs are then stacked on wooden pallets with final weatherproof outer covering, giving the option of outside storage.

R-Values and Roll Dimensions

Spacesaver can provide widths of 386mm, 580mm and 1160mm from a single roll, due to its pre-cut perforations,

Ecological Information

APR 1200 products are made from glass mineral wool, one of the most environmentally friendly insulants available.
Sustainable
APR 1200 products are manufactured from silica sand, the earth's most abundantly occurring mineral and a sustainable, infinite resource.
Recyclable
Approximately 80% of the raw material used in the production of APR 1200 products is recycled, far more than
any comparable product. The recycled material can be post-consumer glass (from housing generation projects) or waste glass from flat glass manufacture, which would otherwise go to landfill.
Environmental
The manufacturing process does not use or contain CFC's, HCFC's or other damaging gases - nor has it ever. In addition, the unique resilience of Isover glass mineral wool enables high compression packing which means more insulation in a smaller space than almost any other insulant. The result is better vehicle utilisation, reducing the environmental impact of transportation.
Eco Homes/Sustainable Homes
APR 1200 products achieve full credit under Eco Homes performance for zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of zero.

Downloads - select from drop-down menu below


Manufacturer's Contact Details

Saint-Gobain - Isover, UK Commercial Centre, Leake Road, Gotham, Nottinghamshire, NG11 0LB
Tel: +44 (0)115 969 8010 - Fax: +44 (0)115 983 1675
Email: Click here - Internet: www.isover.com

This page was last updated: Wednesday, February 1, 2012

Isover Acoustic Partition Roll from £1.68m² or £40.24 per roll

Select required items by ticking the appropriate tick-boxes
Select the "Go to Shopping Cart - Add Quantities" button,
then add the required quantities on the shopping cart page.

Isover APR 1200 (2x600mm) 25mm, 1.2x20m = 24m²

1 plus rolls @ £1.76 per m² = £42.07 (£50.49 Inc-VAT)
5 plus rolls @ £1.74 per m² = £41.71 (£50.06 Inc-VAT)
10 plus rolls @ £1.73 per m² = £41.34 (£49.61 Inc-VAT)
15 plus rolls @ £1.71 per m² = £40.97 (£49.17 Inc-VAT)
20 plus rolls @ £1.70 per m² = £40.61 (£48.74 Inc-VAT)
25 plus rolls @ £1.68 per m² = £40.24 (£48.29 Inc-VAT)

Isover APR 1200 (2x600mm) 50mm, 1.2x13m = 15.6m²

1 plus rolls @ £2.77 per m² = £43.11 (£51.74 Inc-VAT)
5 plus rolls @ £2.74 per m² = £42.74 (£51.29 Inc-VAT)
10 plus rolls @ £2.72 per m² = £42.37 (£50.85 Inc-VAT)
15 plus rolls @ £2.70 per m² = £41.99 (£50.39 Inc-VAT)
20 plus rolls @ £2.67 per m² = £41.62 (£49.95 Inc-VAT)
25 plus rolls @ £2.65 per m² = £41.24 (£49.49 Inc-VAT)

Isover APR 1200 (2x600mm) 75mm, 1.2x12.2m = 14.64m²

1 plus rolls @ £4.58 per m² = £66.92 (£80.31 Inc-VAT)
4 plus rolls @ £4.54 per m² = £66.34 (£79.61 Inc-VAT)
7 plus rolls @ £4.50 per m² = £65.76 (£78.92 Inc-VAT)
10 plus rolls @ £4.46 per m² = £65.18 (£78.22 Inc-VAT)
13 plus rolls @ £4.42 per m² = £64.60 (£77.52 Inc-VAT)
16 plus rolls @ £4.38 per m² = £64.01 (£76.82 Inc-VAT)

Isover APR 1200 (2x600mm) 100mm, 1.2x9.17m = 11m²

1 plus rolls @ £5.88 per m² = £64.64 (£77.57 Inc-VAT)
4 plus rolls @ £5.83 per m² = £64.08 (£76.90 Inc-VAT)
7 plus rolls @ £5.78 per m² = £63.51 (£76.22 Inc-VAT)
10 plus rolls @ £5.73 per m² = £62.95 (£75.54 Inc-VAT)
13 plus rolls @ £5.68 per m² = £62.39 (£74.87 Inc-VAT)
17 plus rolls @ £5.63 per m² = £61.83 (£74.20 Inc-VAT)

 

Insulation Online Limited

27 Massetts Road, Horley, Surrey, RH6 7DQ

Email: enquiries@insulation-online.com

insulation-online.com - £500.00+ orders/large vehicle access
just-heating.com - electric central heating, boilers, radiators
just-rooflights.com - rigid tube light pipes / sky light tunnels
just-insulation.com - DIY specialists and small builders

Search

All information is extracted from that provided by the manufacturer, and links to their technical literature are provided above. Please contact the manufacturer for details beyond the scope of this web site.

Select the products that you require, by ticking the appropriate boxes, then click the 'Add to Cart' button to add quantities.