Product Related Links and Downloads

Downloads - select from drop-down menu below

Product Information Downloads Return to Home Page Gyproc Product Portfolio Gyproc Plasterboard Selector Gyproc Wallboard Gyproc Fireline Gyproc Plank Gyproc Soundbloc Gyproc Thermaline Guide to Part L Gyproc Thermaline Insulated Plasterboards Gyproc ThermaLine Basic Gyproc ThermaLine Plus Gyproc ThermaLine Super Gyproc Drywall Adhesive Celotex PL4000 Plasterboard Datasheet Kingspan Kooltherm K17 Insulated Dry-lining Kingspan Kooltherm K18 Insulated Dry-lining Knauf Drywall Brochure (Housing) Knauf Drywall Brochure (Commercial) Knauf Drywall BBA Certificate

Manufacturer's Contact Details

British Gypsum Limited, Drywall Academy Advice Centre,
East Leake, Loughborough, Leicestershire LE12 6JT.
Telephone: 08705 456123 - Fax: 08705 456356
E-mail: Click here - Internet www.british-gypsum.com

This page was last updated: Thursday December 29, 2011

 

Add products to shopping cart

Gyproc Thermaline - High Performance Insulated Plasterboards

Tyvek Housewrap from as little as £0.49m² - £67.72 per roll

Select items by checking the relevant tick-boxes then select the"Go to Shopping Cart - Add Quantities" button, then add the required quantities on the shopping cart page.

'1' signifies a popular product generally available at majority of our depots. Allow one or two working days from date of order for delivery

'2' signifies a less popular product, only readily available at selected depots. Allow 3 - 4 working days for delivery

'3' signifies a rarely requested product sourced directly from manufacturer. Allow 5 - 10 working days for delivery. Also, minimum quantities may apply.

'4' signifies a rarely requested product sourced directly from the manufacturer, and possibly manufactured to order in minimum quantities.
Allow at least 10 working days for delivery.

 

Insulation Online Limited

27 Massetts Road, Horley,Surrey, RH6 7DQ

Email: enquiries@insulation-online.com

insulation-online.com - £500.00+ orders/large vehicle access
just-rooflights.com - rigid tube light pipes / sky light tunnels
just-insulation.com - DIY specialists and small builders

Basket Items =

Basket Total =

Including VAT=

British Gypsum Thermaline Products...

British Gypsum has simplified its range of Gyproc ThermaLine laminates, so now you can easily choose the thermal performance board to suit your insulationneeds and budget.

The range has also been extended to give you greater choice, giving solutions to a much wider choice of high performance applications.

The Gyproc performance range of plasterboards have been developed to provide additional performance in the key areas of fire, acoustics, thermal, impact resistance and moisture resistance, for a wide range of demanding lining applications.

Gyproc ThermaLine laminates comprise Gyproc WallBoard laminated to a layer of thermal insulating material, enabling a high quality wall finish and an efficient thermal lining to be fitted in one simple operation.

As insulation standards change thermal laminates are easy to upgrade - no post-construction filling of cavities or external cladding.

Why laminates?

Gyproc ThermaLine laminates are the perfect way to enhance thermal insulation.

Whether designed into buildings from the outset or retro-fitted in to older buildings, they provide an easy way to help comply with Building Regulations Approved Document L in England and Wales and Section 6 in Scotland.

They can also contribute towards credits in the Code for Sustainable Homes, to improve the sustainability of new housing.

Design and Installation Benefits of Gyproc Thermaline

Thermal laminates are relatively lightweight boards and require no additional structural support.

Completely clear cavities can be maintained - the best form of protection against rain penetration over a long period, particularly in exposed locations.

With the insulation as close to the internal surface as possible, Gyproc ThermaLine laminates provide a rapid response to intermittent heating, creating more comfortable living spaces
for occupants.

The integral vapour control in Gyproc ThermaLine PLUS and SUPER reduce the risk of condensation.

Gyproc ThermaLine laminates can eliminate cold bridging when installed continuously over framing members or joists.

They can be used to provide additional insulation in the roof and used for room-in-the-roof applications.

Internal dry lining and insulation in just one fixing operation - meaning buildings can be completed faster.

Rapid response to intermittent heating - creating comfortable living conditions for the occupant more quickly.

Reduced risk of condensation - a key factor when designing domestic dwellings.

Wide product range to meet the Building Regulations on a variety of masonry or timber frame walls, new-build or refurbishment.

Can also contribute additional insulation to roof linings - for typical 3 storey constructions or room-in the-roof conversions

nternal insulation

Insulating external walls on the inside, closer to the heat source than exterior or cavity insulation, means quicker reaction to heat input. This is especially important in our unpredictable climate and where intermittent heating patterns are in use. Internal insulation is also the ideal choice for refurbishment projects involving the upgrading of existing walls, particularly solid walls, as it provides insulation and a high quality internal lining in one simple operation.

Insulating with thermal laminates

The use of plasterboard thermal laminates has long been established in construction and their benefits well recognised. Comprising a sheet of Gyproc WallBoard laminated to a layer of thermal insulation, Gyproc ThermaLine thermal laminates provide an internal dry lining finish and insulation in just one product and a single fixing operation.

The Gyproc ThermaLine range consists of five thermal laminate types, (different insulants) in varying thicknesses - each providing a simple, effective solution to heat loss through walls and pitched roofs on different constructions.

Board types

T/E - with Gyproc jointing materials for taped and filled joints or application of Thistle Board Finish or Thistle Multi-Finish plaster.

Plastering

The face (ivory) of Gyproc WallBoard can be plastered with either Thistle Board Finish or Thistle Multi-Finish. There should be the minimum of delay between completion of the lining and the commencement of plastering.

Jointing

Gyproc jointing materials produce durable joint reinforcement and a smooth, continuous, crack-resistant surface ready for priming and final decoration. A number of jointing specifications are available to suit the board type, method of application, and site preference.

Decoration

After the joint treatment has dried, decoration, including any decorator’s preparatory work, should follow with the minimum delay.

Repair

Minor damage - Lightly sand the surface to remove burrs and fill flush with Gyproc Easi-Fill or Gyproc Easi-Fill 45, or two applications of Gyproc Joint Cement. When dry, apply Gyproc Drywall Primer or Gyproc Drywall Sealer to leave the surface ready for decoration

Deep indents resulting from impact - Check the plasterboard core to ensure that it is not shattered. If intact, apply a coat of Gyproc Joint Filler, or Gyproc Easi-Fill or Gyproc Easi-Fill 45, followed by the procedure for repairing minor damage as outlined above, once set/dry.

Damaged core and/or broken edges (non-performance situations only) - Remove the damaged area of core. Score the liner approximately 10mm away from the sound plaster around the damaged area, and peel the paper liner away. Apply Thistle GypPrime or PVA to seal the core and surrounding liner. Bulk fill the hole with a stiff mix of Gyproc Easi-Fill or Gyproc Easi-Fill 45, or Gyproc Joint Filler, and strike off flush. Apply Gyproc Easi-Fill or Gyproc Easi-Fill 45, or two applications of Gyproc Joint Cement, once the filler is set/dry. When dry, apply Gyproc Drywall Primer or Gyproc Drywall Sealer (only suitable in non-performance situations).

Extensive damage - When the damage is more extensive, it may be necessary to replace that area of plasterboard. It is important that the replacement board is of the same type as specified and installed. Cut out the affected area back to the nearest framing member. Replace the plasterboard, accurately cutting and screw-fixing the same type and thickness of plasterboard. Fill edge joints, then tape and finish in the recommended way. Treat the finished surface with Gyproc Drywall Primer or two coats of Gyproc Sealer, if previously specified for vapour control purposes. Redecorate as required.

NB It is essential that repairs are made 'like for like'. If the finish is skim plaster, jointing materials must not be used in the repair.

---

Thermal Performance

Gyproc ThermaLine thermal laminates not only deliver excellent insulation performance, but can also provide vapour control and a first-class plastering or decorating surface in one board.

 

Gyproc ThermaLine BASIC

provides a base level improvement in thermal insulation, which is ideal when used in combination with other insulation or where modest upgrades are required.

The range of thicknesses suits the low-level upgrades available.

Gyproc ThermaLine PLUS

has added benefits, including a a higher performing insulant backing, and an integral vapour control to minimise the risk of condensation forming behind the lining.

Window reveals
The 27mm is the thinnest of the laminates with an integral vapour control, making it an ideal board to insulate around window reveals.

Timber frame constructions
The new 48mm laminate has been designed with a 12.5mm Gyproc WallBoard backing to provide 30 minutes fire resistance, ideal for use in timber frame constructions, as part of the internal wall solution.

Gyproc ThermaLine SUPER

is available in a wide range of thicknesses from 30mm - 90mm and provides solutions for a whole variety of constructions, including refurbishments and conversions of properties requiring substantial thermal upgrades. All boards have vapour control as standard, so provides peace of mind for all environments.

---

Gyproc ThermaLine Basic

Gyproc WallBoard factory-bonded to an expanded polystyrene insulant that is both CFC and HCFC-free - meaning zero ODP (Ozone Depletion Potential).

Gyproc WallBoard consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The expanded polystyrene insulant is then further bonded to the finished plasterboard. Gyproc WallBoard is a plasterboard that is suitable for drylining internal surfaces.

Characteristics

Faced with ivory coloured Gyproc WallBoard

Backed with white coloured expanded polystyrene

Available in tapered edge only

Complies with EN 13950 from 1st March 2007

Thermal Conductivity: WallBoard 0.19W/mK

Thermal Conductivity: Basic expanded polystyrene 0.040W/mK

Applications

Can be used in both refurbishment and new-build where a basic level of additional thermal insulation is required.

Board Colour

Ivory face paper White coloured expanded polystyrene backing

Board printing

Face - screw centre markings ‘x’. Edge - product code, EAN number, board thickness x width x length, edge type. Reverse - none.

 

22mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.5	T	0.35

30mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	7.2	T	0.55

40mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	8.1	T	0.80

 

---

Gyproc ThermaLine Plus

Gyproc WallBoard factory-bonded to an extruded polystyrene insulant that is both CFC and HCFC-free - meaning zero ODP (Ozone Depletion Potential). The closed cell structure of the foam provides integral vapour control.

Gyproc WallBoard consists of an aerated gypsum core encased in, and firmly bonded to strong paper liners. The extruded polystyrene insulant is then further bonded to the finished plasterboard. Gyproc WallBoard is a plasterboard that is suitable for drylining internal surfaces.

Characteristics

Faced with ivory coloured Gyproc WallBoard

Backed with orange coloured extruded polystyrene

Available in tapered edge only

Complies with EN 13950 from 1st March 2407

Thermal Conductivity: WallBoard 0.19W/mK

Thermal Conductivity: Plus extruded polystyrene 0.030W/mK

Applications

Suitable for new buildings and for upgrading existing buildings when mid to high thermal performance is required.

Board colour

Ivory face paper Orange coloured extruded polystyrene backing

Board printing

Face - screw centre markings ‘x’. Edge - product code, EAN number, board thickness x width x length, edge type. Reverse - none.

27mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.5	T	0.63

35mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	7.2	T	0.88

40mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	7.7	T	1.07

48mm Board (faced with 12.5mm Gyproc WallBoard)

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	8.1	T	1.25

 

---

Gyproc ThermaLine Super

Gyproc WallBoard factory-bonded to CFC and HCFC-free high thermal performance phenolic foam insulant, meaning zero ODP (Ozone Depletion Potential). It has good fire performance, with Class 0 rating to both faces. Also has low toxicity and smoke obscuration of less than 5%. Includes a vapour control layer as standard to reduce risk of condensation.

Gyproc WallBoard consists of an aerated gypsum core encased in, and firmly bonded to strong paper liners. The phenolic foam insulant is then further bonded to the finished plasterboard. Gyproc WallBoard is a plasterboard that is suitable for drylining internal surfaces.

Characteristics

Faced with ivory coloured Gyproc WallBoard

Backed with brown coloured phenolic foam

Available in tapered edge only

Complies with EN 13950 from 1st March 2407

Thermal Conductivity: WallBoard 0.19W/mK

Thermal Conductivity: Super phenolic foam 0.022W/mK to 0.024W/mK
(dependent on thickness of foam)

Applications

A very high performing, yet cost-effective, thermal laminate used for refurbishment and room-in-the-roof applications where a substantial upgrade in thermal insulation is required.

Board colour

Ivory face paper - brown coloured phenolic foam backing

Board printing

Face - screw centre markings 'x'. Edge - product code, EAN number, board thickness x width x length, edge type. Foam edge - Gyproc ThermaLine SUPER.

 

50mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.5	T	1.97

60mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.6	T	2.56

70mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.7	T	3.06

80mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.8	T	3.56

90mm Board

Width	Length	Weight	Edge	Thermal resistance
mm	mm	kg/m²	T/S	m²K/W
1200	2400	6.9	T	4.06

 

Please note: Minimum order level of £500.00 (ex-VAT) and all deliveries come on 28 ton trucks (large curtain sided lorries).

The product information and specifications above are extracted from the manufacturer's published materials. Please download and fully review the manufacturer's information prior to purchase.